Slat Panel Installation Guide

Installation of cladding panels based on the type are as below.

1. A) Interior Panels

   1. Wood Veneer, PVC/WPC & Natural Wood

      Cut the panels to size with a miter saw first. For adhering panels to the prepped drywall, wood or brick there are three ways:

      • Glue : General purpose construction glue on the back of panels and adhere them into the wall

      • Screw : You can screw the felt for wood veneer panels and edge of the PVC/WPC panels into the wall. There are some clips for PVC/WPC panels which makes it easier to screw them into the wall.

      • Nail : You can screw the felt for wood veneer panels and edge of the PVC/WPC panels into the wall with a nail gun.

• B) Exterior Panels

1. WPC

   Cut the panels to size with a miter saw and either screw or nail (with a nail gun) them into stucco, wood or brick surface. The surface has to be prepped and even before installation. There are some clips which makes it easier to screw them into the wall.

2. Aluminum

   The install is usually a horizontal base screwed into the surface and slats to snap click on the horizontal base.