Slat Panel Types

There are two types of slat panel (cladding panel) based on application:

• A) Interior

Panels designed for interior uses with minimal exposure to sunlight, moisture and temperature difference. These panels are as below based on material :

1. Wood Veneer (MDF) : Usually MDF core slats covered by a natural, technical or vinyl wood veneer on top. These slats are either stapled or glued on a felt backing. These panels are usually 1-2 ft wide by 8-10 ft tall. Cost of these panels is $6-10 per square foot.

2. PVC/WPC : Polyvinyl chloride (PVC) or Wood Plastic Composite (WPC) panels are extruded profile with a vinyl cover on top in different colors from wood-look to solid colors and designs. These panels are usually 5-10 inch wide by 8-10 ft tall. They overlap and lock into each other for easy install. Cost of these panels is $4-7 per square foot.

3. Natural Wood Slat : Custom size slats can be made out of any kind of wood lumber and be stapled on top of a felt backing or straight into the wall without backing. This is the most expensive type due to labor cost.

• B) Exterior

Panels designed for exterior uses with exposure to sunlight (UV protected), significant moisture and temperature difference. These panels are as below based on material :

1. WPC : Wood Plastic Composite (WPC) panels are extruded profile with wood grain on top in different colors and designs. These panels are usually 8-10 inch wide by 8-10 ft tall. They overlap and lock into each other for easy install. Cost of these panels is $7-10 per square foot.

2. Aluminum : Aluminum core slats with a paint layer on top in different wood-look and modern designs. Cost of these panels is $20-30 per square foot.